PETOL(GEARENCH)SURGRIP扭力扳手选型表

PETOL(GEARENCH)SURGRIP扭力扳手选型表

带驱动适配器和扭矩扳手手柄的扳手头。

PETOL SURGRIP扭矩扳手在组装泵零件时提供精确的扭矩测量单位：ft.-lbs.。每个扳手都经过钻孔，仅通过摩擦就可以抓住特定的O.D.，并且不会损坏零件的表面。

这些扳手具有petol-surgrip摩擦钳的特点，可与任何1/2“或3/4”驱动“卡扣式”扭矩扳手手柄一起使用。

3/4" drive torque wrench handle fits directly into torque wrench head.
3/4" 驱动扭矩扳手手柄直接安装到扭矩扳手头中。

An adaptor is required when using a 1/2" drive torque wrench handle.
使用 1/2" 驱动扭矩扳手手柄时需要一个适配器。
注意：扳手头、适配器和扭矩扳手手柄必须单独订购。

PART NO.	ITEM DESCRIPTION	DRIVE SIZE	LENGTH	WEIGHT	MAXIMUM WORKING LOAD
ZT250M	Torque Wrench Handle	1/2"	23-1/2"	4-3/8 lbs.	250 ft.-lbs.
ZT600M	Torque Wrench Handle	3/4"	40"	14 lbs.	600 ft.-lbs.
ZT1000M	Torque Wrench Handle	1"	70"	38 lbs.	1000 ft.-lbs.
ZT50A	1/2" Adaptor	3/4"	n/a	4 ozs.	n/a
ZT51A	1" Adaptor	3/4"	n/a	1-5/8 lbs.	n/a

NOTE: If using ZT600M Torque Handle with ZT1 Wrench Heads, DO NOT EXCEED 500 ft.-lbs.
注意：如果将 ZT600M 扭矩手柄与 ZT1 扳手头一起使用，请勿超过 500 英尺磅。
选型表：

PART NO.	O.D.	GRIPPING WIDTH	WEIGHT
ZT1:0.625T	0.625"	2.25"	6-1/2 lbs.
ZT1:0.688T	0.688"	2.25"	6-1/2 lbs.
ZT1:0.750T	0.750"	2.25"	6-1/2 lbs.
ZT1:0.812T	0.812"	2.25"	6-1/2 lbs.
ZT1:0.875T	0.875"	2.25"	6-1/2 lbs.
ZT1:0.938T	0.938"	2.25"	6-1/2 lbs.
ZT1:1.000T	1.000"	2.25"	6-1/2 lbs.
ZT1:1.062T	1.062"	2.25"	6-1/2 lbs.
ZT1:1.125T	1.125"	2.25"	6-1/2 lbs.
ZT1:1.188T	1.188"	2.25"	6-1/2 lbs.
ZT1:1.250T	1.250"	2.25"	6-1/2 lbs.
NOTE: Maximum Working Load for ZT1 Wrench Heads is 500 ft.-lbs.
ZT2:1.312T	1.312"	2.50"	9-1/4 lbs.
ZT2:1.375T	1.375"	2.50"	9-1/4 lbs.
ZT2:1.438T	1.438"	2.50"	9-1/4 lbs.
ZT2:1.500T	1.500"	2.50"	9-1/4 lbs.
ZT2:1.625T	1.625"	2.50"	9-1/4 lbs.
ZT2:1.688T	1.688"	2.50"	9-1/4 lbs.
ZT2:1.750T	1.750"	2.50"	9-1/4 lbs.
ZT3:1.625T	1.625"	2.50"	10-1/2 lbs.
ZT3:1.750T	1.750"	2.50"	10-1/2 lbs.
ZT3:1.812T	1.812"	2.50"	10-1/2 lbs.
ZT3:1.875T	1.875"	2.50"	10-1/2 lbs.
ZT3:1.938T	1.938"	2.50"	10-1/2 lbs.
ZT3:1.960T	1.960"	2.50"	10-1/2 lbs.
ZT3:2.000T	2.000"	2.50"	10-1/2 lbs.
ZT3:2.062T	2.062"	2.50"	10-1/2 lbs.
ZT3:2.125T	2.125"	2.50"	10-1/2 lbs.
ZT3:2.188T	2.188"	2.50"	10-1/2 lbs.
ZT3:2.250T	2.250"	2.50"	10-1/2 lbs.
ZT3:2.312T	2.312"	2.50"	10-1/2 lbs.
ZT3:2.375T	2.375"	2.50"	10-1/2 lbs.
ZT4:2.375T	2.375"	3.00"	17-1/8 lbs.
ZT4:2.500T	2.500"	3.00"	17-1/8 lbs.
ZT4:2.625T	2.625"	3.00"	17-1/8 lbs.
ZT4:2.688T	2.688"	3.00"	17-1/8 lbs.
ZT4:2.750T	2.750"	3.00"	17-1/8 lbs.
ZT4:2.812T	2.812"	3.00"	17-1/8 lbs.
ZT4:2.875T	2.875"	3.00"	17-1/8 lbs.
ZT5:3.000T	3.000"	3.50"	24 lbs.
ZT5:3.125T	3.125"	3.50"	24 lbs.
ZT5:3.250T	3.250"	3.50"	24 lbs.
ZT5:3.375T	3.375"	3.50"	24 lbs.
ZT5:3.500T	3.500"	3.50"	24 lbs.
ZT5:3.625T	3.625"	3.50"	24 lbs.
ZT5:3.688T	3.688"	3.50"	24 lbs.
ZT5:3.750T	3.750"	3.50"	24 lbs.
ZT5:3.875T	3.875"	3.50"	24 lbs.
ZT5:4.000T	4.000"	3.50"	24 lbs.

Special O.D. sizes available upon request. Special sizes are non-returnable.
特殊外径 可根据要求提供尺寸。 特殊尺寸不可退换。